Biotrue multi-purpose solution is indicated for use in the daily conditioning, cleaning, removal of protein deposits, rinsing, chemical (not heat) disinfection, and storage of soft (hydrophilic) contact lenses, including silicone hydrogel contact lenses, and as recommended by your eye care practitioner.
How to use:
To condition, clean, remove protein, and disinfect lenses, complete these simple steps.
This daily regimen is recommended by Bausch + Lomb for a healthy and comfortable contact lens wearing experience:
STEP 1: Place at least 3 drops of Biotrue multi-purpose solution on each side of the lens surface and gently rub for 20 seconds.
STEP 2: Thoroughly rinse each side of the lens for 5 seconds with a Biotrue multi-purpose solution.
STEP 3: Place cleaned contact lenses in the lens case and fill them with fresh Biotrue multi-purpose solution.
Soak at least 4 hours.
Remember to always use fresh solution – discard solution from lens case after each use.
Your lenses are now ready to wear.
If any debris remains on contact lenses, rinse with a Biotrue multi-purpose solution prior to insertion.
Always follow your eye care professional’s instructions.
Based on your individual tear chemistry and lens-wearing schedule, your eye care professional may recommend additional products or procedures.
If not wearing contact lenses immediately, store them in a closed lens case.
Do not store your lenses in simple saline in place of the Biotrue multi-purpose solution.
The saline solution will not disinfect.
Lenses may be stored in the unopened case until ready to wear, up to a maximum of 30 days.
If you store your lenses for longer periods of time, they must be cleaned and disinfected with fresh Biotrue multi-purpose solution prior to lens insertion.
Caution & Warnings:
Always discard solution from lens case after each use
Keep the bottle tightly closed when not in use
Store solution at room temperature.
Use before the expiration date marked on the carton and bottle.
Discard any remaining solution 90 days after opening.
Keep out of reach of children.
Ingredients:
A sterile, isotonic solution that contains hyaluronan, sulfobetaine, poloxamine, boric acid, sodium borate, edetate disodium, and sodium chloride and preserved with a dual disinfection system (polyaminopropyl biguanide) 0.00013% and polyquaternium 0.0001%
Biotrue multi-purpose solution is indicated for use in the daily conditioning, cleaning, removal of protein deposits, rinsing, chemical (not heat) disinfection, and storage of soft (hydrophilic) contact lenses, including silicone hydrogel contact lenses, and as recommended by your eye care practitioner.
How to use:
To condition, clean, remove protein, and disinfect lenses, complete these simple steps.
This daily regimen is recommended by Bausch + Lomb for a healthy and comfortable contact lens wearing experience:
STEP 1: Place at least 3 drops of Biotrue multi-purpose solution on each side of the lens surface and gently rub for 20 seconds.
STEP 2: Thoroughly rinse each side of the lens for 5 seconds with a Biotrue multi-purpose solution.
STEP 3: Place cleaned contact lenses in the lens case and fill them with fresh Biotrue multi-purpose solution.
Soak at least 4 hours.
Remember to always use fresh solution – discard solution from lens case after each use.
Your lenses are now ready to wear.
If any debris remains on contact lenses, rinse with a Biotrue multi-purpose solution prior to insertion.
Always follow your eye care professional’s instructions.
Based on your individual tear chemistry and lens-wearing schedule, your eye care professional may recommend additional products or procedures.
If not wearing contact lenses immediately, store them in a closed lens case.
Do not store your lenses in simple saline in place of the Biotrue multi-purpose solution.
The saline solution will not disinfect.
Lenses may be stored in the unopened case until ready to wear, up to a maximum of 30 days.
If you store your lenses for longer periods of time, they must be cleaned and disinfected with fresh Biotrue multi-purpose solution prior to lens insertion.
Caution & Warnings:
Always discard solution from lens case after each use
Keep the bottle tightly closed when not in use
Store solution at room temperature.
Use before the expiration date marked on the carton and bottle.
Discard any remaining solution 90 days after opening.
Keep out of reach of children.
Ingredients:
A sterile, isotonic solution that contains hyaluronan, sulfobetaine, poloxamine, boric acid, sodium borate, edetate disodium, and sodium chloride and preserved with a dual disinfection system (polyaminopropyl biguanide) 0.00013% and polyquaternium 0.0001%