Product Description:The Yuwell 405A Air Compressing Nebulizer is a light, a hand-held device meant to deliver medication via an inhaled mist. It uses an air compressor to pump air through the device. The compressed air through the nebulizer turns the medication into an aerosol, relieving symptoms such as asthma, Chronic Obtrusive Pulmonary Disease (COPD), or other pulmonary disorders. Its new, improved compact version is quieter, more efficient, and the DC motor reduces the atomization time significantly. Included in Package: Nebulizing machine, drug cup, mask, mask belt, filter, adapter, and tube. Net Weight: 260gWorking System: Intermittent running for 20 minutes with an interval of 40 minutes Very low noise less than 60 decibelsDimensions: 13cm (l) × 6.5cm (w) ×6.8cm (h) Power - Input: AC 100 - 220V, 50/60Hz 350 mA ; Output: DC 12V, 1000 mAMaximum Nebulization Rate less than 0.2 mL/minMass Median Diameter (MMD): 3.9μm Adjustable atomizing cup Percentage of nebulized particles with diameter less than 5μm >65% The pressure of the compression pump: ≥0.1MPa Free flow of compression pump: ≥3.5L/min How to use:Connect the air tube to the medicine cup at one end and the air outlet in the nebulizer at the other end. Preparing the Nebulizer - Open the cap of the medication cup, add prescribed medicine, cover the cap and connect the mouthpiece or mask, check that the power switch in the nebulization machine is in off position, plug the AC adapter with the main unit, and plug the adapter in the power outlet. Turn the power switch to on position. Inhale the mist generated through the mask/mouthpiece After usage, switch off the machine and disconnect it from the power outlet. Disconnect the nebulizer kit from the air tube. Caution & Warnings:Always dispose of any remaining medication in the medication cup after each use. Use fresh medication each time you use the device. After cleaning, all attachments must be dried and then stored in a clean place.Do not store the air tube when there is moisture or medication residue inside. Make sure the AC adapter plug is fully inserted into the power outlet when in use. Do not plug or unplug the AC adapter into the electrical outlet with wet hands. Store the product in a well-ventilated room Avoid violent vibration in transportation. Normal working conditions: Environmental temperature between 10 C -40 C, Relative humidity between 30% - 75%, and Air pressure: 86Kpa - 106 KpaElectrical Safety Requirements - Class II equipment, Type B applied part If the storage temperature is below 5 ℃, apply it only when the temperature meets normal operating conditions. #html-body [data-pb-style="6201FDF2A427E"]{justify-content: flex-start; display: flex; flex-direction: column; background-position: left top; background-size: cover; background-repeat: no-repeat; background-attachment: scroll; border-style: none; border-width: 1px; border-radius: 0px; margin: 0px; padding: 0px;}#html-body [data-pb-style="6201FDF2A4291"]{border-style: none; border-width: 1px; border-radius: 0px; margin: 0px; padding: 0px;}
Product Description:The Yuwell 405A Air Compressing Nebulizer is a light, a hand-held device meant to deliver medication via an inhaled mist. It uses an air compressor to pump air through the device. The compressed air through the nebulizer turns the medication into an aerosol, relieving symptoms such as asthma, Chronic Obtrusive Pulmonary Disease (COPD), or other pulmonary disorders. Its new, improved compact version is quieter, more efficient, and the DC motor reduces the atomization time significantly. Included in Package: Nebulizing machine, drug cup, mask, mask belt, filter, adapter, and tube. Net Weight: 260gWorking System: Intermittent running for 20 minutes with an interval of 40 minutes Very low noise less than 60 decibelsDimensions: 13cm (l) × 6.5cm (w) ×6.8cm (h) Power - Input: AC 100 - 220V, 50/60Hz 350 mA ; Output: DC 12V, 1000 mAMaximum Nebulization Rate less than 0.2 mL/minMass Median Diameter (MMD): 3.9μm Adjustable atomizing cup Percentage of nebulized particles with diameter less than 5μm >65% The pressure of the compression pump: ≥0.1MPa Free flow of compression pump: ≥3.5L/min How to use:Connect the air tube to the medicine cup at one end and the air outlet in the nebulizer at the other end. Preparing the Nebulizer - Open the cap of the medication cup, add prescribed medicine, cover the cap and connect the mouthpiece or mask, check that the power switch in the nebulization machine is in off position, plug the AC adapter with the main unit, and plug the adapter in the power outlet. Turn the power switch to on position. Inhale the mist generated through the mask/mouthpiece After usage, switch off the machine and disconnect it from the power outlet. Disconnect the nebulizer kit from the air tube. Caution & Warnings:Always dispose of any remaining medication in the medication cup after each use. Use fresh medication each time you use the device. After cleaning, all attachments must be dried and then stored in a clean place.Do not store the air tube when there is moisture or medication residue inside. Make sure the AC adapter plug is fully inserted into the power outlet when in use. Do not plug or unplug the AC adapter into the electrical outlet with wet hands. Store the product in a well-ventilated room Avoid violent vibration in transportation. Normal working conditions: Environmental temperature between 10 C -40 C, Relative humidity between 30% - 75%, and Air pressure: 86Kpa - 106 KpaElectrical Safety Requirements - Class II equipment, Type B applied part If the storage temperature is below 5 ℃, apply it only when the temperature meets normal operating conditions. #html-body [data-pb-style="6201FDF2A427E"]{justify-content: flex-start; display: flex; flex-direction: column; background-position: left top; background-size: cover; background-repeat: no-repeat; background-attachment: scroll; border-style: none; border-width: 1px; border-radius: 0px; margin: 0px; padding: 0px;}#html-body [data-pb-style="6201FDF2A4291"]{border-style: none; border-width: 1px; border-radius: 0px; margin: 0px; padding: 0px;}