Product Description:
Fever measurement made easy! The clinical thermometer with contact-measurement technology is easy to use and waterproof.
- Contact-measurement technology
- Display in °C
- Waterproof
- No mercury, without glass
- Can be disinfected
- 1 memory space
- Automatic switch-off
- Acoustic signal when measurement is complete
- Medical device
- With protective cap
Use
- First remove the protective foil from the display. For switching on, briefly press the on/off key.
- A short acoustic signal will announce that the thermometer is switched on.
- The thermometer will carry out a self-test for about 2 seconds.
- During the selftest all segments of the display will appear.
- Then the reference reading (37°C) appears.
- Then the measurement symbol “°C” flashes and “Lo” is shown on the display.
- The thermometer is now ready for use.
- During the measurement, the current temperature is displayed continuously, and the “°C” symbol flashes on and off.
- The measurement is completed when a stable temperature has been reached.
- When this stage has been reached, an acoustic signal is heard, the “°C” symbol stops flashing and the temperature measured is displayed. As long as the measured temperature is below 32 °C, “Lo °C” will appear.
- Higher temperatures will be shown directly, e.g. 32,1 °C. By prolonging the length of measurement until after the acoustic signal, more accurate measurements can be obtained.
- In case the temperature is measured in the armpit, the thermometer should be left in the armpit for the recommended time of measurement, in spite of the acoustic signal.
- If temperatures over 37,8 °C are measured, a fever alarm sounds short bleeping tones, 10 seconds long). If temperatures higher than 42,9°C are measured, the symbol for “Hi °C” will appear.
- To prolong the life of the battery, please switch off the thermometer by briefly pressing the on/off key after the measurement.
- Otherwise the thermometer will automatically switch off after 10 minutes.